ガスタービン膜冷却翼における熱流動解析性能の評価 -レイノルズ平均型乱流モデルによる熱伝達推定-
Assessment of CFD performance for film cooled Gas Turbine Blade -Heat Transfer Prediction by RANS turbulence modeling-
2011年05月
ガスタービン翼の膜冷却解析手法の評価 -前縁部膜冷却に対する解析-
Evaluation of CFD analysis for film cooling on gas turbine blade -Analysis of Cooling Performance on a Blade Leading Edge-
2009年06月
火力機器部品の非破壊形状計測におけるX線CTの適用性評価 -ガスタービン動翼の耐久性評価への適用-
Performance Verification of X-ray CT to Apply on Non-destructive Geometry Measurement of a Thermal Power Component -Application to Durabirity Assessment of a Gas Turbine Rotor Blade-
2009年02月
ガスタービン高温部品を対象とした伝熱流動数値解析 -第6報 起動/停止時における1300℃級初段動翼温度の過渡解析-
Numerical Analysis of Heat Transfer for Gas Turbine Hot-gas-path Parts - The 6th report Transient Analysis of 13 ℃ class First Stage Rotor Blade Temerature in Startup and Shutdown-
2005年07月
ガスタービン高温部品を対象とした伝熱流動数値解析 -第5報 1300℃級初段動翼温度の3次元連成解析-
Numerical Analysis of Heat Transfer for Gas Turbine Hot-gas-path Parts -5th report, Three Dimensional Conjugate Analysis for 13℃ class First-stage Rotor Blade Temperature-
2004年03月
1300℃級ガスタービン初段動翼内部冷却の熱流動解析 -第2報 LESを用いた傾斜リブ付き流路の冷却特性関係式の導出-
Numerical Analysis of Heat Transfer of Inner Cooling Passage for the First Stage Rotor Blade of 13℃ class Gas Turbine-2nd report, Formulation of cooling performance of a rectangular channel with crossed angle ribs based on Large Eddy Simulation
2003年03月
ガスタービン高温場を対象とした伝熱流動数値解析 -第4報 起動/停止時における1100℃級初段動翼温度の非定常解析-
Numerical Analysis of Heat Transfer for Gas Turbine Hot-gas-path Parts -4th report, Transient Analysis for 11℃ Class 1st-stage Bucket Temperature in Start-up and Shut-down
2000年04月
ガスタービン高温場を対象とした伝熱流動数値解析 -第3報 1100℃級初段動翼温度の3次元解析-
Numerical Analysis of Heat Transfer for Gas Turbine Hot-gas-path Parts -3rd report, 3 dimensional Analysis for 11℃ Class 1st-stage Bucket Temperature
1999年02月
タービン翼の温度推定における不確かさ評価と簡便な温度推定式の導出
Uncertainty quantification of turbine blade temperature estimation and simplified temperature estimation
2016年06月
ガスタービン用遮熱コーティングを対象としたはく離の非破壊検出手法の開発(第2報) -適正な加熱条件に関する検討-
Development of Nondestructive Testing Method for TBC Delamination of Gas Turbine - Part 2: Study on Appropriate Heating Condition -
2014年06月
LESによるガスタービンの膜冷却流れ構造と冷却特性の解明
Large-eddy simulation of film cooling flow structure and cooling performance of gas turbine
2012年05月
ガスタービン動翼の膜冷却性能に及ぼす内部冷却構造の影響評価 ―第2報 熱伝達率による評価―
Effects of Inner Structure of Gas Turbine Blades on Film Cooling Performance -Part2 Evaluation of Heat Transfer Coefficient-
2012年04月
ガスタービン動翼の膜冷却効率に及ぼす内部冷却リブと孔後方突起の影響
Effects of internal ribs and bumps on film effectiveness of gas turbine blade
2012年02月
ガスタービン動翼の膜冷却性能に及ぼす内部冷却構造の影響評価―膜冷却効率による評価―
Effects of inner structure of gas turbine blades on film cooling performance -evaluation of film effectiveness-
2011年05月
ガスタービン静翼き裂進展予測手法の高度化-連成伝熱解析による膜冷却静翼の温度推定-
Advancement of Crack Propagation Prediction Method for Gas Turbine Nozzle Vane -Temperature Estimation of a Film Cooled Nozzle Vane by Conjugate Heat Transfer Analysis-
2010年02月
実機使用後ガスタービン動翼の表面粗さ計測および粗さが及ぼす翼外面温度上昇の試算
Measurment of Surface Roughness on Disposed Gas Turbine Blade and Estimation of its Effect on Temperature Elevation
2009年06月
ガスタービン翼を対象としたTBC遮熱性能非破壊評価法の開発 -評価手法と装置構成の提案-
Development of Non-Destructive Evaluation Method for Heat Resistance of TBC on Gas Turbine Blade - Proposal of evaluation method and system configuration -
2009年06月
ガスタービン翼の膜冷却解析手法の評価 -平板膜冷却に対する解析-
Evaluation of CFD analysis for film cooling on gas turbine blade -Analysis of flat plate configuration-
2009年03月
発電用大型ガスタービン初段動翼を対象とした温度解析技術の開発
Development of numerical temperature analysis using CFD for 1st stage rotor blade of gas turbine for power generation
2005年08月
Ni基一方向凝固超合金の高温強度評価法の開発 -第7報 1300℃級ガスタービン初段動翼の解析的寿命評価法の開発-
Development of High Temperature Strength Evaluation Method for Nickel-based Directionally Solidified Superalloy - 7th Report: Development of an Analytical Life Assessment Method for a 13C-class Gas Turbine First Row Blade -
2005年06月
1300℃級ガスタービン初段動翼内部冷却の熱流動解析 -第3報 タービン翼前縁冷却流路を模擬したリブ付き三角流路の実験的検討-
Numerical analysis of heat transfer in cooling passage for the 1st stage rotor blade of 13℃ class gas turbine 3rd report, Measurement of flow and heat transfer in triangular channels with ribs
2005年05月
ガスタービン高温部品管理支援システムの開発 -発見的手法とGAの組合せによる最適部品ローテーション計画手法-
Development of management support system for gas turbine hot gas path parts ‐ Optimal parts rotation scheduling method by a combination of a heuristic method and a genetic algorithm -
2004年08月
ガスタービン高温部品管理支援システムの開発 -ネットワーク利用可能なプラットフォームフリーシステムの開発-
Development of management support system for gas turbine hot gas path parts -Development of platform-free system for network -
2004年03月
3次元有限要素解析による1100℃級ガスタービン初段動翼の損傷評価 --運転条件の影響に関する検討--
Damage Assessment for First Stage Blade of a 11℃-class Gas Turbine based on Three-Dimensional Finite Element Analysis
2002年04月
件名:コーティング層における剥離の非破壊検査方法および非破壊検査装置
公開番号:2015-227810
登録番号:6318429
件名:コーティング層における剥離の非破壊検査方法および非破壊検査装置
公開番号:2016-102703
登録番号:6579570